Frontier SE Crew Cab 4WD V6-3.3L (VG33E) (2000)
ABS Actuator: Service and Repair
Before VIN 343314
Removal
1) Disconnect battery cable.
2) Drain brake fluid.
3) Disconnect ABS actuator and electric unit (control unit connector) and brake pipes.
4) Remove mounting bracket fixing bolts and nuts.
Installation
CAUTION: After installation, refill brake fluid. Then bleed air. Refer to Brake Bleeding; Service and Repair.
1) Connect brake pipes temporarily.
2) Tighten fixing bolts and nuts.
3) Tighten brake pipes.
4) Connect connector and battery cable.