Frontier SE Crew Cab 4WD V6-3.3L (VG33E) (2000)
1. Insert piston seal into groove on cylinder body.
2. With piston boot fitted to piston, insert piston boot into groove on cylinder body and install piston.
3. Properly secure piston boot.
CAUTION:
-
Secure dust seal properly.
-
Lubricate with new brake fluid before installing plastic pistons into cylinder body.
Before VIN 343314
Disassembly
WARNING: Do not place your fingers in front of piston.
CAUTION:
-
Do not scratch or score cylinder wall.
-
CL28VD type front disc brake uses plastic pistons. Handle them carefully.