Frontier SE Crew Cab 4WD V6-3.3L (VG33E) (2000)
Seat Belt: Service Precautions
Except Models Beginning With Serial # 343314
CAUTION:
-
Before removing the seat belt pre-tensioner assembly, turn the ignition switch
OFF, disconnect both battery cables and wait at least 3 minutes.
-
After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-tensioner assembly connector, ensure entire SRS
operates properly. Refer to "SRS Operation Check", "TROUBLE DIAGNOSIS - Restraint System".
-
Do not disassemble buckle or seat belt assembly.
-
Do not reuse seat belt anchor bolts after removal. Replace with new ones.
-
Replace anchor bolts if they are deformed or worn out.
-
Never oil tongue and buckle.
-
If any component (including anchor bolts) of seat belt assembly is questionable, do not repair. Replace the whole seat belt assembly.
-
If webbing is cut, frayed, or damaged, replace seat belt assembly.
-
When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.