Frontier XE 4WD L4-2.4L (KA24DE) (1998)
/Page-1897002.png)
With the ignition switch in the ON or START position, power is supplied:
^
through 7.5 A fuse [No. [5], located in the fuse block (J/B)]
^
to warning chime unit terminal (1).
Ground is supplied to warning chime unit terminal (8) through body grounds (M14) and (M68).
When a signal, or combination of signals, is received by the warning chime unit, the warning chime will sound.
Ignition key warning chime
With the key in the ignition key cylinder, the ignition switch in the OFF or ACC position, and the driver's door open, the warning chime will
sound. A battery positive voltage is supplied:
^
from key switch terminal (2)
^
to warning chime unit terminal (5).
Ground is supplied:
^
to warning chime unit terminal (7)
^
from door switch LH terminal (2).
Door switch LH terminal (3) is grounded through body grounds (M14) and (M68).
Light warning chime
With ignition switch OFF or ACC position, driver's door open, and lighting switch in 1ST or 2ND position, the warning chime will sound. A
battery positive voltage is supplied:
^
from lighting switch terminal (12)
^
to warning chime unit terminal (4).
Ground is supplied:
^
to warning chime unit terminal (7)
^
from door switch LH terminal (2).
Door switch LH terminal (3) is grounded through body grounds (M14) and (M68).
Seat belt warning chime
The warning chime will sound for approximately 6 seconds when ignition switch is turned from OFF to ON and seat belt is unfastened.
Ground is supplied:
^
to warning chime unit terminal (2)
^
from seat belt buckle switch terminal (1).
Seat belt buckle switch terminal (2) is grounded through body grounds (M14) and (M68)
