nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 9146 > < Diagram Information and Instructions|Page 9144
Page 16
background image

The customer may indicate the incident goes away after the car warms up (winter time). The cause could be related to water freezing somewhere in the
wiring/electrical system.
There are two methods to check for this. The first is to arrange for the owner to leave his car overnight. Make sure it will get cold enough to demonstrate
his complaint. Leave the car parked outside overnight. In the morning, do a quick and thorough diagnosis of those electrical components which could be
affected.
The second method is to put the suspect component into a freezer long enough for any water to freeze. Reinstall the part into the car and check for the
reoccurrence of the incident. If it occurs, repair or replace the component.

Water Intrusion

The incident may occur only during high humidity or in rainy/snowy weather. In such cases, the incident could be caused by water intrusion on an
electrical part. This can be simulated by soaking the car or running it through a car wash.
Do not spray water directly on any electrical components.

Electrical Load

The incident may be electrical load sensitive. Perform diagnosis with all accessories (including A/C, radio, fog lamps) turned on.

Cold or Hot Start Up

On some occasions an electrical incident may occur only when the car is started cold. Or it may occur when the car is restarted hot shortly after being
turned off. In these cases you may have to keep the car overnight to make a proper diagnosis.

Ground Distribution Cell Codes

Diagram Information and Instructions|Page 9146 > < Diagram Information and Instructions|Page 9144