Frontier XE 4WD L4-2.4L (KA24DE) (1998)
Refer to the "Diagnosis/Repair Flow Chart" shown to diagnose and resolve this incident, should it occur.
SERVICE PROCEDURE
Headlight Wire Harness Connector Replacement Procedure
1.
Disconnect the vehicle-side wire harness connector from the headlight bulb.
2.
Cut the vehicle wire harness about an inch back from the headlight harness connector.
3.
Cut the wires of the replacement connector to the appropriate length.
4.
Strip the end of each wire (on the vehicle wire harness side and on the replacement connector wires).