Frontier XE 4WD L4-2.4L (KA24DE) (1998)
4. Inspect the inside diameter of the solenoid bracket metal pipe (from EVAP canister) for contamination or rust (see Figure 1).
A. If contamination or rust is present, replace the solenoid valve bracket and reconnect the vacuum hoses.
B. If contamination or rust is not present, reconnect the vacuum hose and use the appropriate section of the applicable service manual to diagnose
and repair the vehicle.
5. Ensure the wire harness connector and all hoses are properly connected to the purge volume control valve.
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line using the following claims coding:
For DTC P1440
OR
For DTC P1444
OR
For DTC P1491