nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Intake Air Temperature Sensor > < Diagram Information and Instructions|Page 2662
Page 1
background image

Crankshaft Position Sensor: Testing and Inspection

COMPONENT INSPECTION 
Crankshaft position sensor (OBD) 

1. Disconnect crankshaft position sensor (OBD) harness connector.
2. Loosen the fixing bolt of the sensor.
3. Remove the sensor.
4. Visually check the sensor for chipping.
5. Check resistance as shown in the figure.

Resistance: Approximately 166.5 - 203.5 ohms [at 20°C (68°F)] 

If NG, replace crankshaft position sensor (OBD).

Intake Air Temperature Sensor > < Diagram Information and Instructions|Page 2662