Frontier XE 4WD L4-2.4L (KA24DE) (1998)
9.
Disconnect the key lock rod from the A/T shifter assembly by removing the pin clip. Retain this pin clip for reuse (see Figure 6).
10.
Disconnect the brake pedal interlock solenoid harness located under the steering column assembly (see Figure 6).
11.
Disconnect the A/T cable from the rear of the A/T shifter assembly by prying the connector straight back with a door trim removal tool (see Figure
7).
12.
Remove the (2) 6mm bolts securing the assembly (see Figure 8).