Frontier XE 4WD L4-2.4L (KA24DE) (1998)
5. Detach spider assembly with press.
6. Draw out boot.
Cover drive shaft serration with tape to prevent damaging the boot.
Wheel Side (ZF100)
CAUTION:
The joint on the wheel side cannot be disassembled.
-
Before separating joint assembly, put matching marks on drive shaft and joint assembly.
-
Separate joint assembly with suitable tool.
Be careful not to damage threads on drive shaft.
-
Remove boot bands.
INSPECTION
Thoroughly clean all parts in cleaning solvent, and dry with compressed air. Check parts for evidence of deformation and other damage.
Drive Shaft
-
Replace drive shaft if it is twisted or cracked.
Boot
-
Check boot for fatigue, cracks and wear. Replace boot with new boot bands.
Joint Assembly (Final Drive Side)
-
Replace any parts of double offset joint which show signs of scorching, rust, wear or excessive play.
-
Check serration for deformation. Replace if necessary.
-
Check slide joint housing for any damage. Replace if necessary.
Joint Assembly (Wheel Side)
-
Replace joint assembly if it is deformed or damaged.
ASSEMBLY