Frontier XE King Cab 2WD L4-2.4L (KA24DE) (2000)
Transmission Position Switch/Sensor: Adjustments
Before VIN #343314
Park/Neutral Position (PNP) Switch Adjustment
1. Remove control linkage and manual lever from manual shaft.
2. Set manual shaft in "N" position.
3. Loosen park/neutral position (PNP) switch fixing bolts.
4. Insert pin into adjustment holes in both park/neutral position (PNP) switch and manual as near vertical as possible.
5. Tighten park/neutral position (PNP) switch fixing bolts.
6. Remove pin.
7. Reinstall any part removed.
8. Adjust control linkage. Refer to Shift Cable, A/T.
9. Check continuity of park/neutral position (PNP) switch.