Frontier XE King Cab 2WD V6-3.3L (VG33E) (2001)
Keyless Entry Transmitter Battery: Service and Repair
ID Code Entry Procedure
ID Code Entry Procedure
NOTE:
-
If a remote controller is lost, the ID code of the lost remote controller must be erased to prevent unauthorized use.
To erase all ID codes in memory, register one ID code (remote controller) four times. After all ID codes are erased, the ID codes of all remaining
and/or new remote controllers must be re-registered.
-
When registering an additional remote controller, the existing ID codes in memory may or may not be erased. If four ID codes are stored in
memory when an additional code is registered, only the oldest code is erased. If less than four ID codes are stored in memory when an additional
ID code is registered, the new ID code is added and no ID codes are erased.
-
If you need to activate more than two additional new remote controllers, repeat the procedure "ADDITIONAL ID CODE ENTRY" for each new