Frontier XE King Cab 4WD L4-2.4L (KA24DE) (1998)
Power Steering Bleeding: Service and Repair
Air Bleeding Procedure
1. Raise front end of vehicle until wheels are clear of the ground.
2. Add fluid into oil tank to specified level. Then quickly turn steering wheel fully to right and left and lightly touch steering stoppers.
NOTE: Repeat steering wheel operation until fluid level no longer decreases.
3. Start engine.
4. Repeat step 2 above.
NOTE: Incomplete air bleeding will cause the following to occur. When this happens, bleed air again.
a. Air bubbles in reservoir tank
b. Clicking noise in oil pump
c. Excessive buzzing in oil pump
NOTE: Fluid noise may occur in the valve or oil pump. This is common when the vehicle is stationary or while turning steering wheel slowly. This
does not affect performance or durability of the system.