Frontier XE King Cab 4WD L4-2.4L (KA24DE) (1998)
Disassembly
STEERING GEAR MODEL PB59K
CAUTION: Oil sealing parts, dust cover, copper washer and snap ring must not be used again after removal.
NOTE: Before disassembly, measure turning torque. If not within specifications, replace steering gear assembly.
1. Place steering gear in a vise with Tool.
2. Set worm gear in a straight ahead position.
3. Loosen (do not remove) sector shaft cover bolt.
4. Knock out end of sector shaft with a plastic hammer.
5. Remove sector shaft by hand.