Frontier XE King Cab 4WD V6-3.3L (VG33E) (2002)
B.
Select "Transfer files via LAN" (see Figure 11). Set the CONSULT-II unit down for now.
NOTE:
If you accidentally choose a menu option other than "Transfer Files via LAN", turn CONSULT-II off and restart it according to step BA above.
9.
On ASIST, make sure the Ethernet (IP) Address (for CONSULT-II) displayed in the "CHANGE IP ADDRESS" box is the same number you
printed in step 4E or 4H, then select "CONTINUE".
NOTE:
If the Ethernet (IP) Address (for CONSULT-II) displayed in the "CHANGE IP ADDRESS" box is not correct, turn CONSULT-II off and return to
step 4 in this bulletin.
10.
Data transfer will take about 1 minute and the progress of the transfer is displayed on the ASIST PC screen (see Figure 12). Wait until the data
transfer is complete (see CAUTION, below).