nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Telematics System - Service Information|Page 8 >
Page 1
background image

Technical Service Bulletin # 10-135A

Date: 110105

Telematics System - Service Information

Classification: EL10-044A

Reference: NTB10-135A

Date: January 5, 2011

LEAF; TELEMATICS SERVICE INFORMATION

This bulletin has been amended. A NOTE has been added to "Turning On the TCU During PDI". Please discard previous versions.

APPLIED VEHICLES: 2011 LEAF (ZEO)

SERVICE INFORMATION

This bulletin contains important service procedures that must be performed in order to set-up and maintain the Nissan LEAF Telematics system.

See the Telematics Overview, below, and the Bulletin Overview also below for more information.

NOTE:

Detailed Telematics system information outside the scope of this bulletin can be found in the AV section of the Electronic Service Manual (ESM).

TELEMATICS OVERVIEW

The Nissan LEAF is equipped with a wireless communication device called a Telematics Communication Unit (TCU).

The connection between the TCU and the Nissan CARWINGS(TM) Data Center, along with an active CARWINGS(TM) subscription, allows for
various services.

For example:

^ Some vehicle information and functions are available to the vehicle owner via personal computer or internet-enabled smart phone.

^ Additional information is displayed on the navigation screen in the CARWINGS(TM) section.

BULLETIN OVERVIEW

During Pre-Delivery Inspection (PDI):

^ The TCU is OFF when delivered to the dealership and will need to be turned ON during PDI.

^ Use CONSULT-III plus (C-III plus) to turn ON the TCU.

^ See Turning ON the TCU During PDI for detailed instructions.

When replacing a TCU:

^ If the TCU requires replacement for any reason:

1. Turn OFF the original TCU using C-III plus.

Telematics System - Service Information|Page 8 >