Nissan and Datsun Workshop Service and Repair Manuals

Oxygen Sensor: Service and Repair

 Oxygen Sensor

REMOVAL
1.

Disconnect harness terminal.

2.

Remove sensor with suitable socket or wrench.

INSTALLATION
1.

Apply a thin coating of anti-seize compound to the threads.
NOTE: Do not contaminate sensing tip with compound.

2.

Install sensor and torque it to 21 N-m (2.1 kg-m, 15 lb.ft.).

3.

Apply a thin coating of dielectric compound to the connector.

4.

Connect harness terminal.