Maxima V6-2960cc 3.0L DOHC (VE30DE) (1992)
5. Remove snap ring, then remove ball cage. inner race and ball as a unit.
6. Draw out boot.
Note: Cover drive shaft serrations with tape so as not to damage the boot.
Wheel Side
CAUTION: The joint on the wheel side cannot be disassembled.
1. Betore separating joint assembly, put matchmarks on drivE shaft and joint assembly.
2. Separate joint assembly with a suitable tool.
Note: Be careful not to damage threads on drive shaft.
3. Remove boot bands.
Support Bearing
1. Remove dust shield.
2. Remove snap ring.