Maxima V6-2960cc 3.0L SOHC MFI (VG30E) (1990)
Timing Belt Alignment Marks
-
Temporarily install crank pulley bolt into crankshaft. Rotate crankshaft to #1 TDC. Refer to alignment marks.
Loosening Tensioner Pulley
Retracting Spring Tensioner
-
Loosen tensioner idler pulley nut and retract pulley using hexagon wrench. Tighten pulley nut then remove timing belt.
CHECK
-
Condition of timing belt idler pulley. If there is any roughness to bearing or pulley surface, replace it.
-
Water pump for leakage or bearing problems. If any problems are found, replace the pump.