Maxima V6-2960cc 3.0L SOHC MFI (VG30E) (1990)
10.
Slowly lower the front of the vehicle to the ground.
11.
Add coolant to the reservoir tank until the level reaches the "MAX" mark. Remove the screw which secures the coolant reservoir tank, and with
the return tube attached, lift the reservoir tank above the radiator. Tilt the reservoir tank so the return tube is at the lowest point. Squeeze the return
tube to purge the air trapped in the tube. When the return tube is filled with coolant, return the reservoir tank to its proper location.
12.
Shut the engine OFF. The engine should be allowed to cool down. If the system is not completely filled, some coolant will be sucked back into the
engine. Additionally, the procedure should be repeated at least once to ensure that all of the air has been bled out of the system.