nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Arm Bushing:|FA90003 > < Upper Ball Joint|Page 4844
Page 1
background image

Control Arm Bushing: All Technical Service Bulletins
Suspension - Bushing Noise During Braking

Classification:
FA92-002

Section:
Front Axle

Reference:
TECHNICAL BULLETIN NTB92-053

Models:
1989-91 Maxima (J30)

Date:
June 17, 1992

MAXIMA FRONT SUSPENSION BUSHING NOISE

APPLIED MODELS:
1989-91 Maxima (J30)

APPLIED DATE/V.I.N.: 
This incident was corrected in production on March 20, 1991. JN1HJ01P(*)MT571467.

SERVICE INFORMATION:

Some J30 Maximas may produce a creaking or knocking noise from the front suspension during braking.

REPAIR PROCEDURE:

If the vehicle exhibits the above symptom during braking and its' V.I.N. and Manufacturing Dates are prior to the above baseline V.I.N./Manufacturing
Date, replace the rear bushing for the front transverse link.

This operation should be performed on both sides of the vehicle to ensure uniform vehicle behavior during braking and suspension travel.

PARTS INFORMATION:
Description

NEW P/N

FORMER PIN

Bush, Lowr. Link, GXE

54570-85E01

54570-85E00

Bush, Lowr. Link, SE

54570-85E11

54570-85E10

WARRANTY INFORMATION:
Operation

OpCode

PNC

CS 

CT

FRT

Repl. both Transverse Links/Bushings

MA43AA

54535

4R 

31

2.2hrs.

All Technical Service Bulletins for Control Arm Bushing:|FA90003 > < Upper Ball Joint|Page 4844