nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Customer Interest for Seat Bottom Frame: > < Interior - Noise From Drivers Power Seat Lifter|Page 8211
Page 3
background image

^

If you find the old Spacer Washer on the floor of the car, discard it.

Reinstall the Seat and Check its Operation

7.

Reinstall the seat, making sure:

^

All wire harnesses are connected and correctly routed to prevent pinching and chaffing.

^

The four seat mounting bolts are tightened to: 45 Nm (4.6 Kg.m, 35 ft-lbs.)

8.

Re-connect the battery cables, positive cable first (if you disconnected them in step 2).

9.

Check the power seat controls, making sure:

^

They operate correctly.

^

The incident noise is fixed.

10.

Re-program the radio station presets and re-set the clock (if you disconnected the battery in step 2).

11.

Initialize the power windows and sunroof as applicable. For Frontier and Pathfinder vehicles with Vehicle Dynamic Control (VDC) reset the
Steering Angle Sensor as applicable. Reference the Electronic Service Manual as needed.

Disclaimer

Customer Interest for Seat Bottom Frame: > < Interior - Noise From Drivers Power Seat Lifter|Page 8211