nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Body and Frame|Unibody > < Sound Proofing / Insulation|Service and Repair
Page 1
background image

Spoiler: Service and Repair

REAR AIR SPOILER

Exploded View EI-25

Removal and Installation

REMOVAL

1. Remove trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER".
2. Remove three nuts attaching spoiler to trunk lid.
3. Using a trim stick, carefully remove spoiler by prying adhesive free.

CAUTION:  Use care not to damage paint on trunk and not to damage spoiler if it is to be replaced.

4. Disconnect the center high mount stop lamp connector, then remove the rear air spoiler.

INSTALLATION

Installation is in the reverse order of removal.

NOTE:

-

When installing, make sure that there are not any gaps or waves at the ends of the spoiler.

-

Before installing spoiler, clean surface where spoiler will be mounted with isopropyl alcohol or equivalent to degrease the surface.

Body and Frame|Unibody > < Sound Proofing / Insulation|Service and Repair