Maxima V6-3.5L (VQ35DE) (2007)
Fog/Driving Lamp Bulb: Service and Repair
Bulb Replacement
FRONT FOG LAMP
Removal
CAUTION: Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc., may affect the performance of fog lamp.
When replacing bulb, be sure to replace it with new one.
1. Disconnect fog lamp bulb connector
2. Turn the fog lamp bulb counterclockwise to unlock it from the fog lamp housing.
3. Remove the fog lamp bulb.
Installation
CAUTION:
-
Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it. Do not touch bulb by hand while it is lit or
right after being turned off. Burning may result.
-
Do not leave bulb out of fog lamp housing for a long time because dust, moisture smoke, etc., may affect the performance of fog lamp. When
replacing bulb, be sure to replace it with new one.
Installation is in the reverse order of removal.