Maxima V6-3.5L (VQ35DE) (2007)
Wheel Bearing: Procedures
Removal and Installation
REMOVAL
CAUTION: Wheel hub assembly does not require maintenance. If any of the following symptoms are noted, replace the wheel hub assembly.
^
A growling noise is emitted from the wheel hub assembly while driving.
^
The wheel hub assembly drags or turns roughly.
1. Remove the brake rotor.
2. Remove the rear ABS sensor, then move it away from the wheel hub assembly.
CAUTION: Failure to remove the ABS sensor may result in damage to the sensor wires and the sensor being inoperative.
3. Remove the wheel hub bolts from knuckle and remove the wheel hub assembly.
INSPECTION AFTER REMOVAL
Check for any deformity, cracks, or damage on the wheel hub assembly, replace if necessary
INSTALLATION