Maxima V6-3.5L (VQ35DE) (2007)
d. Reception item of "BCM": On "TCM", "UNKWN" is indicated. This means BCM cannot receive the signal from TCM. Draw a line to
indicate an error between BCM and TCM (line 2-d in the figure).
e. Reception item of "EPS" and "INTELLIGENT KEY": "UNKWN" is not indicated. This indicates normal communication between EPS and
I-KEY and their receiving units. Do not draw any line.
NOTE: On CAN DIAG SUPPORT MNTR (without PAST), "UNKWN" is indicated even though the item is not used in the trouble
diagnosis. For the details of each item on CAN diagnostic support monitor, refer to LAN-44, "CAN Diagnostic Support Monitor". See: Scan
Tool Testing and Procedures