Maxima V6-3.5L (VQ35DE) (2007)
Technical Service Bulletin # 09-045A
Date: 100218
A/T Control/Instruments - Shift Position Indicator Blank
Classification: AT09-006A
Reference: NTB09-045A
Date: February 18, 2010
2007-2008 MAXIMA; SHIFT POSITION INDICATOR BLANK
This bulletin has been amended. IF YOU CONFIRM and CLAIMS INFORMATION have been amended. Please discard all previous copies.
APPLIED VEHICLE: 2007-2008 Maxima (A34)
IF YOU CONFIRM:
The Shift Position Indicator in the Combination Meter is blank when gear selection is Park or Neutral (P or N) as seen in figure 1.
^
If you observe abnormal CVT fluid color or odor, excessive contamination in the oil pan, and/or you can isolate an unusual noise coming from the
transmission, this TSB does not apply.
^
The shift position, indicator located next to the shift lever still works.
ACTIONS:
Replace the Control Valve Assembly.
Reprogram the TCM.
Initialize the TCM.
Clear any DTCs stored in ENGINE and / or TRANSMISSION.
IMPORTANT:
The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.