nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Procedures|Page 5835 > < Procedures|Page 5833
Page 3
background image

Hydrometer Temperature Correction

Charging the Battery

CHARGING THE BATTERY

CAUTION:

-

Do not "quick charge" a fully discharged battery.

-

Keep the battery away from open flame while it is being charged.

-

When connecting the charger, connect the leads first, then turn on the charger. Do not turn on the charger first, as this may cause a spark.

-

If battery electrolyte temperature rises above 60 °C (140 °F), stop charging. Always charge battery at a temperature below 60 °C (140 °F).

Charging Rates

NOTE:  The ammeter reading on your battery charger will automatically decrease as the battery charges. This indicates that the voltage of the battery is
increasing normally as the state of charge improves. The charging amps indicated above refer to initial charge rate.

-

If, after charging, the specific gravity of any two cells varies more than.050, the battery should be replaced.

Procedures|Page 5835 > < Procedures|Page 5833