Maxima V6-3.5L (VQ35DE) (2007)
Tilt Wheel Sensor: Service and Repair
TILT MOTOR AND TILT SENSOR
Removal
Exploded View PS-12
1. Remove the instrument column cover and lower driver instrument panel.
2. Remove LH lower knee protector.
3. Disconnect the tilt sensor electrical connector.
4. Remove the two tilt sensor screws and the tilt sensor.
5. Disconnect the tilt motor electrical connector.
6. Remove the tilt motor bolt and the tilt motor.
Installation
Installation is in reverse order of removal.
NOTE: Make sure the tab in the tilt sensor is engaged with the bracket on the tilt motor.