Maxima V6-3.5L (VQ35DE) (2007)
10. Separate knuckle from lower ball joint stud using Tool.
Tool number: HT72520000 (J-25730-A)
11. Remove knuckle from transverse link.
INSPECTION AFTER REMOVAL
Wheel Hub
^
Check wheel hub for cracks by a magnetic exploration or dying test, and replace if cracked.
Knuckle
^
Check for deformity, cracks (by magnetic exploration or dying test) and damage on steering knuckle, replace if necessary.
Snap Ring
^
Check for wear and damage on snap ring, replace if necessary.
INSTALLATION
Installation is in the reverse order of removal.
^
Tighten front suspension and power steering components to specification.