Maxima GLE V6-2968cc 3.0L DOHC MFI (VQ30DE) (1997)
Inhibitor Switch: Testing and Inspection
Component Testing Procedure
COMPONENT INSPECTION
Inhibitor Switch
1. Check continuity between terminals (1) and (2) and between terminals (3) and (4), (5), (6), (7), (8), (9) while moving manual shaft through each
position.
2. If NG check again with manual control cable disconnected from manual shaft of A/T assembly. Refer to step 1.
3. If OK on step 2, adjust manual control cable.