Maxima GLE V6-3.5L (VQ35) (2002)
Valve Cover: Service and Repair
ROCKER COVER
Removal and Installation
REMOVAL
1. Remove the engine cover using power tool. Remove side engine covers.
2. If removing RH rocker cover, disconnect the mass air flow sensor electrical connector and remove the air cleaner to electric throttle control
actuator tube and air cleaner lid.
3. If removing RH rocker cover, remove the front cowl panel.
4. If removing RH rocker cover, remove the windshield wiper arms and motor assembly.
5. If removing RH rocker cover, remove the intake manifold collector.
6. If removing LH rocker cover, disconnect the air fuel (A/F) ratio sensor.
7. Remove the ignition coils.
8. Position engine harness aside.
9. Disconnect PCV hose.
10. Remove dipstick.