Maxima GLE V6-3.5L (VQ35) (2002)
/Page-616005.png)
20. Remove crankshaft pulley with a suitable puller.
21. Remove intake valve timing control valve covers.
^
Loosen bolts in reverse order shown in the figure.
^
In the cover, the shaft is engaged with the center hole of the intake camshaft sprocket. Remove it straight out until the engagement comes off.
22. Remove air conditioner compressor and bracket. Refer to Heating and Air Conditioning; Air Conditioning.
23. Remove front exhaust tube and its support.
24. Hang engine at right and left side engine slingers with a suitable hoist.
25. Remove right side engine mounting, mounting bracket and nuts.
26. Remove center member assembly.
27. Remove upper and lower oil pans.
28. Remove water pump cover.
29. Remove front timing chain case bolts.
^
Loosen bolts in reverse order shown in the figure.
