Maxima GLE V6-3.5L (VQ35) (2002)
Submit a "Campaign" (CM) line claim using the claims coding information shown.
Campaign I.D.: R2001
Service Procedure
1.
Verify the VIN is eligible for this campaign.
2.
Make sure the ignition switch is in the OFF position.
3.
Remove the driver's floor mat from the vehicle and place it in a safe place.
4.
Remove one bolt and remove the existing accelerator pedal stop (see Figure 1).
5.
Use a pair of diagonal ("Side Cutter") pliers to cut the OLD accelerator pedal stop (see Figure 2) so as to identity it as being the old part.
NOTE:
The old pedal stop can be discarded once the warranty hold period has expired.