Maxima GLE V6-3.5L (VQ35) (2002)
/Page-1891009.png)
D.
Re-install the stabilizer link mounting nut finger-tight (see Figure 14).
E.
Tighten the 4 bush link pin mounting bolts:
^
To 176-216 N-m (18-22 Kg-m, 130-159 ft-lbs)
^
According to the "Tightening Order" shown in Figure 15
F.
Tighten the 2 transverse link rear bracket mounting bolts:
^
To 88 - 119 N-m (9.0 - 12 Kg-m, 65 - 87 ft-lbs)
^
According to the "Tightening Order" shown in Figure 15
G.
Using a back up wrench, tighten the stabilizer link mounting nut to 48-57 N-m (4.9 - 5.9 Kg-m, 36-42 ft-lbs).
H.
Tighten the ball joint nut as follows:
