Maxima GLE V6-3.5L (VQ35) (2002)
/Page-1889005.png)
12.
Loosen, but do not remove at this time, the center bolt of the transverse link's bush link pin (see Figure 5). Then remove and throw away the
remaining 3 bolts (see Figure 5).
13.
Remove the 2 bolts that secure the transverse link rear bracket (see Figure 5).
14.
Tap on the transverse link with a hammer to separate the ball joint tapered shaft from the steering knuckle tapered seat (see Figure 6).
CAUTIONS:
^
Use suitable eye and face protection when using the hammer
^
Be careful when using the hammer not to damage any surrounding brake, steering, or axle components
