Maxima GLE V6-3.5L (VQ35) (2002)
/Page-1624003.png)
4. Check wheel bearing axial end play.
Axial end play: Less than 0.05 mm (0.0020 inch)
DISASSEMBLY
CAUTION: When removing wheel hub or wheel bearing from knuckle, replace wheel bearing assembly (outer race, inner races and grease seals)
with a new one.
Wheel Hub
Drive out hub with inner race (outside) from knuckle with a suitable tool.
Wheel Bearing
When replacing wheel bearing, replace complete wheel bearing assembly (Inner races and outer race).
1. Remove bearing inner race (outside).
2. Remove snap rings.
