Maxima SE V6-3.0L (VQ30DE) (1998)
2. Touch "START".
3. If no failure is detected, inspection is end.
If any problem code is displayed, repair/replace the system according to the IVMS communication diagnosis results.
4. Erase the diagnostic results memory.
a. Turn ignition switch "ON".
b. Touch "IVMS".
c. Touch "IVMS COMM DIAGNOSIS" in "IVMS-COMM CHECK".
d. Touch "START" for "IVMS COMM DIAGNOSIS".
e. Touch "ERASE".
WAKE-UP DIAGNOSIS
1. Touch "WAKE-UP DIAGNOSIS" in "IVMS-COMM CHECK".
2. Touch "START" for "WAKE-UP DIAGNOSIS".