Maxima SE V6-3.0L (VQ30DE) (1998)
Technical Service Bulletin # 99-036A
Date: 000510
Keyless Entry - Remote Programming
Classification:
EL99-001A
Reference:
NTB99-036A
Date:
May 10, 2000
NISSAN KEYLESS REMOTE ENTRY PROGRAMMING
This amended version of NTB99-036 updates the Applied Vehicle, Service Information, and Service This amended Procedure Sections. Please discard
all paper copies of NTB99-036
APPLIED VEHICLES:
1998-00 Altima (L30)
1998-00 Frontier (D22)
1998-99 Maxima (A32)
2000
Maxima (A33)
1998-00 Pathfinder (R50)
1998-99 Sentra (B14)
2000
Sentra (B15)
1999-00 Quest (V41)
2000
Xterra (WD22)
SERVICE INFORMATION
If a remote switch assembly (remote controller) for an Applied Nissan vehicle does not operate or operates intermittently, it may need to be
re-programmed.
Use the following procedure to program the remote controller.
NOTE:
Not all trim level variations of a given vehicle include the remote controller function. Review the vehicle sales brochure to determine if the vehicle
trim level is equipped with the remote controller function before starting the programming procedure.
Also confirm that the remote controller(s) being programmed is the correct remote controller for the vehicle.
NOTE:
A.
1998-99 Altima, Maxima, Pathfinder, Sentra, and Frontier Models, 1999 Quest, and 2000 Frontier Models built before VIN 343314:
If the vehicle has more than one remote controller, the remote controllers must all be programmed at the same time (a maximum of 4 remotes
can be programmed).
B.
All 2000 Altima, Maxima, Pathfinder, Sentra, Quest, Xterra, Frontier Crew Cab and Desert Runner Models, and Frontier Models built after
VIN 343314:
If the vehicle has more than one remote controller, the oldest ID code is erased when programming a new remote when there are already 4 ID
codes in memory.
If there are less than 4 ID codes stored in memory, then the new ID code is added and no ID codes are erased, unless a new remote is
programmed after filling all 4 memory positions. A maximum of 4 remotes can be programmed.
NOTE:
Regarding 2000 Maxima, Pathfinder, and Sentra vehicles:
You may use CONSULT-II to program remotes for these vehicles. Refer to the appropriate Electronic Service Manual (ESM) for further information.
You may also program these vehicle remotes using the Service Procedure provided below.
CLAIMS INFORMATION
^
Re-programming of an otherwise functional remote controller is not covered by warranty.