Maxima SE V6-3.0L (VQ30DE) (1998)
-
Thickness variation (AT least 8 positions):
Maximum 0.01mm (0.0004 inch)
-
If thickness variation exceeds the specification, turn rotor with on-car brake lathe.
Rotor repair limit, 20.0mm (0.787 inch)
ASSEMBLY
1. Insert piston seal into groove on cylinder body.
2. With piston boot fitted to piston, insert piston boot into groove on cylinder body and install piston.
3. Properly secure piston boot.
INSTALLATION
CAUTION:
-
Refill with new brake fluid "DOT 3".
-
Never reuse drained brake fluid.
1. Install brake hose to caliper securely.
2. Install all parts and secure all bolts.
3. Bleed air. Refer to Brake Bleeding / Service and Repair / Bleeding Brake System.