Maxima SE V6-3.0L (VQ30DE) (1998)
13. Remove valve oil seal.
14. Apply engine oil to new valve oil seal and install it with Tool.
OIL SEAL INSTALLING DIRECTION
Install new oil seal in the direction shown in the figure.
FRONT OIL SEAL
1. Remove the following parts:
-
Engine undercover
-
Front RH wheel and engine side cover
-
Drive belts
-
Crankshaft position sensor (REF)
-
Crankshaft pulley
Be careful not to damage sensor edge.
2. Remove front oil seal using a suitable tool.
Be careful not to scratch front cover.