nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Removal and Inspection|Page 3256 > < Removal and Inspection|Page 3254
Page 3
background image

14. Install internal chain guide.
15. Install upper chain guide.
16. Install timing chain tensioner and slack side chain guide.
17. Apply liquid gasket to front timing chain case.

-

Before installation, wipe off the protruding sealant.

18. Install rear case pin into dowel pin hole on front timing chain case.

19. Tighten bolts to the specified torque in order shown in the figure.

-

Leave the bolts unattended for 30 minutes or more after tightening.

20. Apply liquid gasket to water pump cover.

-

Apply a continuous bead of liquid gasket to mating surface of water pump cover.

21. Install water pump cover.
22. Apply liquid gasket to RH and LH rocker covers.

-

Use genuine liquid gasket or equivalent. 

Removal and Inspection|Page 3256 > < Removal and Inspection|Page 3254