Maxima SE V6-3.0L (VQ30DE) (1998)
terminal (5) and terminals (4), (6)
Resistance: Approximately 30 Ohms [at 20°C (68°F)]
3. Reconnect IACV-AAC valve harness connector.
4. Remove idle air adjusting unit assembly (IACV-AAC valve is built-in) from engine.
(The IACV-AAC valve harness connector should remain connected.)
5. Turn ignition switch "ON" and "OFF", and ensure the IACV-AAC valve shaft smoothly moves forward and backward, according to the ignition
switch position.
If NG, replace the IACV-AAC valve.