nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Component Testing Procedures|Page 10022 > < Power Transistor <--> [Ignition Control Module]|Description and Operation

Maxima SE V6-3.0L (VQ30DE) (1998)

Page 1
background image

Power Transistor: Testing and Inspection
Component Testing Procedures

COMPONENT INSPECTION 

Ignition coil with power transistor 

1. Disconnect ignition coil with power transistor harness connector.
2. Check ignition coil with power transistor for resistance between terminals (1) and (2).

If NG, replace ignition coil with power transistor assembly.

Condenser 

1. Disconnect condenser harness connector.
2. Check condenser continuity between terminals (1) and (2)

Resistance ............................................................................................................................................................  Above 1 M Ohms at 25°C (77°F) 

Component Testing Procedures|Page 10022 > < Power Transistor <--> [Ignition Control Module]|Description and Operation