Maxima SE V6-3.0L (VQ30DE) (1998)
DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE
NOTE:
- If "DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch "OFF" and wait
at least 5 seconds before conducting the next test.
- If both DTC P1320 (0201) and DTC P0340 (0101), P1335 (0407), P0335 (0802) or P1336 (0905) are displayed, perform TROUBLE DIAGNOSIS
FOR DTC P0340, P1335, P0335 or P1336 first.
Without Scan Tools
1) Turn ignition switch "ON".
2) Start engine. (If engine does not run, turn ignition switch to "START" at least 5 seconds.)
3) Turn ignition switch "OFF", wait at least 5 seconds and then turn "ON".
4) Perform "Diagnostic Test Mode II (Self-diagnostic results)" with ECM.
Electrical Diagrams
Circuit Connectors