Maxima SE V6-3.0L (VQ30DE) (1998)
2 Of 2
DIAGNOSTIC PROCEDURE
COMPONENT INSPECTION
Ignition coil with power transistor
1. Disconnect ignition coil with power transistor harness connector.
2. Check ignition coil with power transistor for resistance between terminals (1) and (2).
If NG, replace ignition coil with power transistor assembly.
Condenser
1. Disconnect condenser harness connector.
2. Check condenser continuity between terminals (1) and (2)
Resistance: Above 1 M Ohms at 25°C (77°F)