Maxima SE V6-3.0L (VQ30DE) (1998)
harness connectors.
4. Refer to the Circuit Diagram for Quick Pinpoint Check.
If you must check circuit continuity between harness connectors in more detail, such as when a sub-harness is used.
5. When checking circuit continuity, ignition switch should be "OFF".
6. Before checking voltage at connectors, check battery voltage.
7. After accomplishing the Diagnostic Procedures and Electrical Components Inspection, make sure that all harness connectors are reconnected as
they were.
Key to Symbol Signifying Measurements or Procedures
Key To Symbols Signifying Measurements Or Procedures