nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

SRS - Warning Lamp Flashing/Code DA or 7A Set|Page 13782 > < SRS - Warning Lamp Flashing/Code DA or 7A Set|Page 13780
Page 3
background image

14.

Reattach the seat assembly onto the floor and torque retaining bolts to specification. Torque: 32-41 ft-lb

NOTE

For vehicles with manual seats, check the seat track operation. Ensure both left and right seat tracks latch at the same time.

15.

Reinstall the seat back cover.

16.

Reconnect the battery.

17.

Reset the radio presets.

18.

Confirm the SRS light goes out after turning on the ignition.

WARNING

Always work from the side of or underneath the air bag module, not in front of it.

19.

Move the seat to the front, then the rear, then to the front again. Turn the ignition key off. Confirm the SRS light still goes out after turning the
ignition on again.

PARTS INFORMATION

CLAIMS INFORMATION

Submit a Primary Failed Part (PP) line using the claims coding as shown.

SRS - Warning Lamp Flashing/Code DA or 7A Set|Page 13782 > < SRS - Warning Lamp Flashing/Code DA or 7A Set|Page 13780