Maxima SE V6-3.0L (VQ30DE) (1998)
1. Check continuity between terminals (1) and (2) and between terminals (3) and (4), (5), (6), (7), (8), (9) while moving manual shaft through each
position.
2. If NG, check again with manual control cable disconnected from manual shaft of Air assembly. Refer to step 1.
3. If OK on step 2, adjust manual control cable.
4. If NG on step 2, remove inhibitor switch from Air and check continuity of inhibitor switch terminals. Refer to step 1.
5. If OK on step 4, adjust inhibitor switch.
6. If NG on step 4, replace inhibitor switch.
DTC 1003 Park/Neutral Position Switch