Maxima SE V6-3.0L (VQ30DE) (1998)
NOTE:
^
The BSC is equipped with a scanner that can be used to scan the VIN on most vehicles.
^
Scanning the VIN will give the tester the [CCA rating] information for original equipment batteries.
^
For replacement batteries, the [CCA rating] from the battery label must be entered into the BSC manually.
For Nissan Original Equipment Batteries:
^
When using the BSC, make sure the correct vehicle [CCA rating] is entered by scanning the VIN, or entering it manually from the battery
label.
NOTE:
If the VIN cannot be scanned, enter it manually.
^
Make sure to select "ORG EQUIPMENT" on the tester.
^
The [CCA RATING] entered during testing is recorded in the 12-character test output code required for warranty repairs.
^
Claims that are submitted with incorrect [CCA RATING] may be suspended or denied.
Genuine Nissan Replacement Batteries (service part replacements for Nissan Original Equipment Batteries):
^
Scan the VIN, select "GEN REPLACEMENT", then Manually enter the CCA rating from the battery label into the BSC.
NOTE:
If the VIN cannot be scanned, enter it manually.
IMPORTANT:
When using the BSC, you will get inaccurate test results if you don't enter the correct [CCA RATING]
^
The [CCA RATING] entered during testing is recorded in the 12-character test output code required for warranty repairs.
^
Claims that are submitted with incorrect [CCA RATING] may be suspended or denied.
Disclaimer